HW-16 Board Restoration (Part 3) Filed in Vintage Radio on Jan.15, 2014 I’ve finished replacing all of the resistors on the HW-16 Receiver Board. In addition, I replaced the single electrolytic capacitor mounted on the top of the receiver board. They look pretty good on there! Top of HW-16 Rebuilt Receiver Board The 1/2 watt resistors were all replaced with 1-watt 1% metal film resistors. The 1-watt resistors were all replaced with 2-watt 1% metal film resistors. Bottom of the HW-167 Receiver Board Nearly half of all the resistors were more than 5% out of tolerance.